For More Information on Demilec USA Products, visit www.demilecusa.com

Demilec USA

Demilec USA spray foam products meet AFI's high standards with high R-values and high regard for the environment, with some of the highest recycled content available today.

Here's another reason Demilec is high on our list - Demilec's SEALECTION 500®, SEALECTION Agribalance®, HEATLOK SOY®, HEATLOK SOY® 200, and many other specialty products are all manufactured in the United States.

SEALECTION® 500 has a proven 20-year track record in North America, with improved energy efficiency and high yield, and will not sag, settle, deteriorate or decompose.

SEALECTION Agribalance substitutes renewable natural oil for some of the non-renewable content, and is a USDA BioPreferred product with one of the highest R-value’s of any open cell spray foam insulation in the industry.

HEATLOK SOY® 200 contains renewable natural oil and recycled plastic, and is one of the most versatile and high performing spray insulations. It provides an air barrier, vapor retarder, drain plane and water resistive barrier in a single application. The rigid foam adds structural integrity.

AFI Teams With Demilec to "Lok" Out Fire

Demilec tops off its exceptional products with high-quality fire protection, delivered with a prime selection of water-based intumescent coatings:

• Blazelok™ IB4
• Blazelok™ TB
• Blazelok™ TB 200 Primer
• No-Burn® Plus XD
• Andek Fireguard

Blazelok™ IB4

Blazelok™ IB4 is a water-based, fire protection intumescent ignition barrier applied over SEALECTION® 500 or SEALECTION Agribalance®.

• Flash Point: None
• ASTM E 84: Flame Spread = 0, Smoke Developed = 20
• Volatility/VOC: 2.7g/l • Flexible, ductile, elastomeric
• Non-toxic, drain safe, non-fuming
• Complies with 2006 IRC 314.6, 2009 IRC 316.6, IBC 2603.9 and AC 377
• EPA, SCAQMD and LEED compliant
• Complies with USDA requirements for “Incidental Food Contact”

Blazelok™ TB

Blazelok™ TB is a water-based, fire protection intumescent coating.

• Flash Point: None • ASTM E 84: Class I. Flame Spread = 5, Smoke Developed = 20
• Volatility/VOC: < 50 g/L
• Non-toxic, drain safe, non-fuming
• Complies with 2006 IRC 314.6, 2009 IRC 316.6, IBC 2603.9 and IBC 803.2
• Meets all LEED, AQMD and EPA VOC requirements
• Mold and fungus resistance – Excellent (10) per ASTM D-3273-05 and ASTM D-3274-02

Blazelok™ TB 200
Primer Blazelok™ TB 200 Primer is part of a water-based, fire protection, intumescent coating system applied over HEATLOK SOY® 200. It meets the 2006 and 2009 IBC®, 2009 and 2006 IRC® and the NFPA 101, Life Safety Code.

No-Burn® Plus XD

No-Burn® Plus XD was developed specifically for spray polyurethane foam (SPF) international code requirements as an intumescent latex-based coating or ignition barrier alternate that acts as a shield, protecting the substrate from a flame source by surrounding the treated material with a protective char-barrier.

• Flash Point: None
• Volatility/VOC: 18 g/L
• Non-toxic, non-carcinogenic
• Complies with 2006 IRC 314.6, 2009 IRC 316.6, IBC 2603.9 and AC 377 over all surfaces of SEALECTION® 500 and SEALECTION Agribalance®
• Meets LEED, AQMD, CHPS, IgCC, GSA-P100, ICC-700, NGBS, ANSI/ASHRAE Standard 189.1, ANSI/GBI 01-2010 Green Building Assessment Protocol

Andek Fireguard™

Andek Fireguard™ is an intumescent, fire-resistant fireproofing coating for use only with SEALECTION® 500 spray polyurethane insulation. Firegard has been in use for more than 20 years, protecting ducts, pipes, tanks, wooden structures, building components, boilers, freezers, and production and storage facilities in all types of climates.

• Flash Point: None
• ASTM E 84: Class I. Flame Spread = 5, Smoke Developed = 30
• Volatility/VOC: 0
• Non-toxic, drain safe, non-fuming
• Remains flexible and tough, moves with thermal changes
• Complies with 2006 IRC 314.6, 2009 IRC 316.6, IBC 2603.9 and AC 377